The use of compressed air to deskin the nuts guarantees an extremely gentle deskinning. The nuts are moving in the compressed air stream and the deskinning takes place when the nuts touch each other. Compared to traditional brush deskinning machines, there is no heavy mechanical stress on the nut surface.

At the same time, the compressed air stream ensures that loosened skin particles are immediately removed from the nuts and the nut surface is therefore absolutely clean.

The deskinning process takes place as a batch process, which allows to optimally adapt the deskinning to the respective nut type.

OVERVIEW

The deskinning system HPDS

The HPDS system uses compressed air to enable an optimal deskinning process. This ensures that the nuts are peeled very gently.

The deskinning system HPDS
OVERVIEW

The deskinning system HPDS

The modular design of the deskinning system HPDS allows an optimal and cost-effective adaptation to the production requirements. A large capacity range can be covered by combining deskinning modules. The removed shells can be aspirated either via filters or cyclones.

The deskinning system HPDS
HIGHLIGHTS

The deskinning system HPDS

Here are the highlights of the deskinning system HPDS:

  • Flexible combination of deskinning modules
  • Suitable for deskinning hazelnuts and peanuts
  • Complete discharge of the deskinning cylinder
  • Quick and easy setting of deskinning parameters
  • Almost no wear on the deskinning cylinders
  • Extremely clean surface of the deskinned nuts
  • In comparison to conventional brush deskinning machines, no damage to the nut surfaces
CAPACITIES

The deskinning system HPDS

The deskinning system HPDS is available with the following capacities:

  • HPDS 500: 500 kg/h roasted hazelnuts / peanuts
  • HPDS 1000: 1000 kg/h roasted hazelnuts / peanuts
  • HPDS 2000: 2000 kg/h roasted hazelnuts / peanuts
  • HPDS 4000: 4000 kg/h roasted hazelnuts / peanuts